[ad_1]
How can Ansible assist folks constructing simulations with Cisco Modeling Labs (CML)?
Just like Terraform, Ansible is a typical, open-source automation software typically utilized in Steady Integration/Steady Deployment (CI/CD) DevOps methodologies. They’re each a sort of Infrastructure as Code (IaC) or Infrastructure as Knowledge that help you render your infrastructure as textual content information and management it utilizing instruments reminiscent of Git. The benefit is reproducibility, consistency, velocity, and the data that, while you change the code, folks approve, and it will get examined earlier than it’s pushed out to your manufacturing community. This paradigm permits enterprises to run their community infrastructure in the identical manner they run their software program and cloud practices. Afterall, the infrastructure is there to help the apps, so why handle them otherwise?
Though overlaps exist within the capabilities of Terraform and Ansible, they’re very complementary. Whereas Terraform is healthier on the preliminary deployment and making certain ongoing consistency of the underlying infrastructure, Ansible is healthier on the preliminary configuration and ongoing administration of the issues that stay in that infrastructure, reminiscent of methods, community gadgets, and so forth.
In a typical workflow during which an operator needs to make a change to the community, let’s say including a brand new community to be marketed through BGP, a community engineer would specify that change within the code or extra seemingly as configuration information in YAML or JSON. In a typical CI workflow, that change would have to be accepted by others for correctness or adherence to company and safety considerations, as an example. Along with the eyeball exams, a sequence of automated testing validates the information after which deploys the proposed change in a take a look at community. These exams may be run in a bodily take a look at community, a digital take a look at community, or a mix of the 2. That movement may appear to be the next:
The benefit of leveraging digital take a look at networks is profound. The associated fee is dramatically decrease, and the power to automate testing is elevated considerably. For instance, a community engineer can spin up and configure a brand new, complicated topology a number of occasions with out the probability of outdated exams messing up the accuracy of the present testing. Cisco Modeling Labs is a good software for this sort of take a look at.
Right here’s the place the Ansible CML Assortment is available in. Just like the CML Terraform integration lined in a earlier weblog, the Ansible CML Assortment can automate the deployment of topologies in CML for testing. The Ansible CML Assortment has modules to create, begin, and cease a topology and the hosts inside it, however extra importantly, it has a dynamic stock plugin for getting details about the topology. That is essential for automation as a result of topologies can change. Or a number of topologies might exist, relying on the exams being carried out. In case your topology makes use of dynamic host configuration protocol (DHCP) and/or CML’s PATty performance, the knowledge for the way Ansible communicates with the nodes must be communicated to the playbook.
Let’s go over among the options of the Ansible CML Assortment’s dynamic stock plugin.
First, we have to set up the gathering:
ansible-galaxy assortment set up cisco.cml
Subsequent, we create a cml.yml within the stock with the next contents to inform Ansible to make use of the Ansible CML Assortment’s dynamic stock plugin:
plugin: cisco.cml.cml_inventory group_tags: community, ios, nxos, router
As well as to specifying the plugin identify, we will additionally outline tags that, when discovered on the gadgets within the topology, add that system to an Ansible group for use later within the playbook:
As well as to specifying the plugin identify, we will additionally outline tags that, when discovered on the gadgets within the topology, add that system to an Ansible group for use later within the playbook:
- CML_USERNAME: Username for the CML consumer
- CML_PASSWORD: Password for the CML consumer
- CML_HOST: The CML host
- CML_LAB: The identify of the lab
As soon as the plugin is aware of find out how to talk with the CML server and which lab to make use of, it might return details about the nodes within the lab:
okay: [hq-rtr1] => { "cml_facts": { "config": "hostname hq-rtr1nvrf definition Mgmt-intfn!naddress-family ipv4nexit-address-familyn!naddress-family ipv6nexit-address-familyn!nusername admin privilege 15 secret 0 adminncdp runnno aaa new-modelnip domain-name mdd.cisco.comn!ninterface GigabitEthernet1nvrf forwarding Mgmt-intfnip tackle dhcpnnegotiation autonno cdp enablenno shutdownn!ninterface GigabitEthernet2ncdp enablen!ninterface GigabitEthernet3ncdp enablen!ninterface GigabitEthernet4ncdp enablen!nip http servernip http secure-servernip http max-connections 2n!nip ssh time-out 60nip ssh model 2nip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctrnip ssh shopper algorithm encryption aes128-ctr aes192-ctr aes256-ctrn!nline vty 0 4nexec-timeout 30 0nabsolute-timeout 60nsession-limit 16nlogin localntransport enter sshn!nend", "cpus": 1, "data_volume": null, "image_definition": null, "interfaces": [ { "ipv4_addresses": null, "ipv6_addresses": null, "mac_address": null, "name": "Loopback0", "state": "STARTED" }, { "ipv4_addresses": [ "192.168.255.199" ], "ipv6_addresses": [], "mac_address": "52:54:00:13:51:66", "identify": "GigabitEthernet1", "state": "STARTED" } ], "node_definition": "csr1000v", "ram": 3072, "state": "BOOTED" } }
The primary IPv4 tackle discovered (so as of the interfaces) is used as `ansible_host` to allow the playbook to hook up with the system. We will use the cisco.cml.stock playbook included within the assortment to indicate the stock. On this case, we solely specify that we wish gadgets which might be within the “router” group created by the stock plugin as knowledgeable by the tags on the gadgets:
mdd % ansible-playbook cisco.cml.stock --limit=router okay: [hq-rtr1] => { "msg": "Node: hq-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.199:22" } okay: [hq-rtr2] => { "msg": "Node: hq-rtr2(csr1000v), State: BOOTED, Handle: 192.168.255.53:22" } okay: [site1-rtr1] => { "msg": "Node: site1-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.63:22" } okay: [site2-rtr1] => { "msg": "Node: site2-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.7:22" }
Along with group tags, the CML dynamic stock plugin may even parse tags to cross info from PATty and to create generic stock information:
If a CML tag is specified that matches `^pat:(?:tcp|udp)?:?(d+):(d+)`, the CML server tackle (versus the primary IPv4 tackle discovered) shall be used for `ansible_host`. To vary `ansible_port` to level to the translated SSH port, the tag `ansible:ansible_port=2020` may be set. These two tags inform the Ansible playbook to hook up with port 2020 of the CML server to automate the desired host within the topology. The `ansible:` tag can be used to specify different host information. For instance, the tag `ansible:nso_api_port=2021` can be utilized to inform the playbook the port to make use of to succeed in the Cisco NSO API. Any arbitrary reality may be set on this manner.
Getting began
Making an attempt out the CML Ansible Assortment is simple. You should utilize the playbooks supplied within the assortment to load and begin a topology in your CML server. To start out, outline the setting variable that tells the gathering find out how to entry your CML server:
% export CML_HOST=my-cml-server.my-domain.com % export CML_USERNAME=my-cml-username % export CML_PASSWORD=my-cml-password
The following step is to outline your topology file. That is a commonplace topology file you can export from CML. There are two methods to outline the topology file. First, you possibly can use an setting variable:
% export CML_LAB=my-cml-labfile
Alternatively, you possibly can specify the topology file while you run the playbook as an additional–var. For instance, to spin up a topology utilizing the inbuilt cisco.cml.construct playbook:
% ansible-playbook cisco.cml.construct -e wait="sure" -e
This command hundreds and begins the topology; then it waits till all nodes are operating to finish. If -e startup=’host’ is specified, the playbook will begin every host individually versus beginning them suddenly. This permits for the config to be generated and fed into the host on startup. When cml_config_file is outlined within the host’s stock, it’s parsed as a Jinja file and fed into that host as config at startup. This permits for just-in-time configuration to happen.
As soon as the playbook completes, you need to use one other built-in playbook, cisco.cml.stock, to get the stock for the topology. As a way to use it, first create a cml.yml within the stock listing as proven above, then run the playbook as follows:
% ansible-playbook cisco.cml.stock PLAY [cml_hosts] ********************************************************************** TASK [debug] ********************************************************************** okay: [WAN-rtr1] => { "msg": "Node: WAN-rtr1(csr1000v), State: BOOTED, Handle: 192.168.255.53:22" } okay: [nso1] => { "msg": "Node: nso1(ubuntu), State: BOOTED, Handle: my-cml-server.my-domain.com:2010" } okay: [site1-host1] => { "msg": "Node: site1-host1(ubuntu), State: BOOTED, Handle: site1-host1:22" }
On this truncated output, three totally different eventualities are proven. First, WAN-rtr1 is assigned the DHCP tackle it acquired for its ansible_host worth, and ansible port is 22. If the host operating the playbook has IP connectivity (both within the topology or a community linked to the topology with an exterior connector), it is going to be capable of attain that host.
The second situation reveals an instance of the PATty performance with the host nso1 during which the dynamic stock plugin reads these tags to find out that the host is accessible by the CML server’s interface (i.e. ansible_host is about to my-cml-server.my-domain.com). Additionally, it is aware of that ansible_port needs to be set to the port specified within the tags (i.e. 2010). After these values are set, the ansible playbook can attain the host within the topology utilizing the PATty performance in CML.
The final instance, site1-host1, reveals the situation during which the CML dynamic stock script can both discover a DHCP allotted tackle or tags to specify to what ansible_host needs to be set, so it makes use of the node identify. For the playbook to succeed in these hosts, it must have IP connectivity and have the ability to resolve the node identify to an IP tackle.
These built-in playbooks present examples of find out how to use the performance within the CML Ansible Assortment to construct your individual playbooks, however you may also use them immediately as a part of your pipeline. In actual fact, we frequently use them immediately within the pipelines we construct for patrons.
If you wish to be taught extra concerning the CML Ansible Assortment, you will discover it in Ansible Galaxy in addition to on Github.
It’s also possible to discover a full, IaC CI/CD pipeline utilizing these modules right here.
Be part of the Cisco Studying Community at the moment without spending a dime.
Comply with Cisco Studying & Certifications
Twitter | Fb | LinkedIn | Instagram | YouTube
Use #CiscoCert to hitch the dialog.
Share:
[ad_2]
Leave a Reply